Vertical Machining Centers

Haas Mini Mill

  • 4th Axis capable
  • 16'' x 12" x 10" XYZ Travels

Haas VF-0E

  • Equiped with Haas HRT-210 Rotary
  • 30'' x 16" x 20" XYZ Travels

Haas VF-0E

  • Equiped with Haas HRT-210 Rotary
  • 30'' x 16" x 20" XYZ Travels

Haas VF-2

  • 30'' x 16" x 20" XYZ Travels

Haas VF-2

  • 30'' x 16" x 20" XYZ Travels

Haas VF-3

  • Equiped with Haas HRT-310 Rotary
  • 40'' x 20" x 25" XYZ Travels

Haas VF-3

  • Equiped with Haas HRT-210 Rotary
  • Equiped with Renishaw probing system
  • 40'' x 20" x 25" XYZ Travels

Haas VF-3SS

  • Equiped with Haas HRTSS-210 Rotary
  • 40'' x 20" x 25" XYZ Travels

Haas VF-5

  • Equiped with Renishaw probing system
  • 50" x 26" x 25" XYZ Travels

Horizontal Machining Centers

Haas EC-300

  • Equiped with full 4th axis capabilities
  • Through spindle coolant
  • 20" x 18" x 14" XYZ Travels

Horizontal Turning Centers

Haas TL-2

  • Used for prototype and low production work.
  • 3" bar capacity
  • 16" x 48" XZ capacities

Haas SL-10

  • Used for medium production chucking.
  • 1.75" bar capacity
  • 14" x 14" XZ capacities

Haas SL-10 barfeeder equipped

  • Used for high production bar feeding
  • 1.75" bar capacity
  • 14" x 14" XZ capacities

Haas ST-10Y Live Milling & barfeeder equipped

  • Used for high production bar feeding
  • 1.75" bar capacity
  • 14" x 14" x 2"  XZY capacities

Haas SL-20 Tailstock equipped

  • Used for medium production chucking and shaft turning
  • 2.00" bar capacity
  • 15" x 21" XZ capacities

Haas SL-30 Tailstock and barfeeder equipped

  • Used for high production bar feeding and large capacitiy turning
  • 3.00" bar capacity
  • 16" x 26" XZ capacities

Haas ST-30M Tailstock and Live Milling

  • Used for high production and large capacitiy turning
  • 3.00" bar capacity
  • 16" x 26" XZ capacities

Automatic

DAKE Cobra Cold Saw

  • Used for high production aluminum Sawing
  • 6" bar capacity
  • 12' bar length feeder

Surface Grinding

Brown & Sharpe 618 Micromaster

  • 22" x 7" x 15" XYZ Travels
  • Capable of semi automatic operation 

Manual and Support

Zeiss Eclipse 720 CMM

  • DCC control for production inspection
  • Reverse engineering
  • 2.8 Microns

Zeiss Elclise 550 CMM

  • DCC control for production inspection
  • reverse engineering
  • 2.8 Microns

Bridgeport Mill

  • 9" x 36"
  • DRO equipped

Do-All Mill

  • 9" x 42"
  • Power Feed all axis
  • DRO equipped

Yam 1428 lathe

  • 14" x 28" XZ capacities
  • DRO equipped

5 Ton Press

  • Bearing and bushing press in/out

 Vibratory Finisher

  • Fully cleans and polishes any metal.
  • can remove rust from old steel parts.

Sandblast Cabinet

  • Removes rust, paint, dirt, and grime.
  • Provides peen finish

DC Morrison Keyseater

  • Production or prototype broaching of keyways.